Radon mitigation refers to any process that is involved in the reduction of the concentration of radon gas in buildings occupied by people. The gas may also exist in water as a solution. Thus, activities entailed in reducing the amount of the gas in water are also classified under radon mitigation. This gas needs to be mitigated because it is a major contributor to environmental radioactivity. When in search of Radon Gas Testing Upper MI should be given priority.
Improvement of ventilation is one of the basic ways of mitigating the gas. The spaces in which ventilation can be applied include under the membrane, slab, or the floor. Proper eradication can also be done by performing air exchanges inside the space every hour. To assist in this process, invention of various systems has been done. These systems use ventilation of activated charcoal to do the job.
This process is comprised of a number of stages which include testing. Testing is done to determine the quality of domestic water and indoor air. As far as safety is concerned, no levels of radon can b considered as safe. Eliminating the gas completely is almost impossible. Therefore, different action levels have been set by governments around the world for when the level is considered to be high enough.
The concentration level of 2.7 pCi/1 or more should call for rapid action according to the WHO. This level of concentration addresses air levels of the gas. Radon that exists in gaseous form is much more dangerous than one that exists a solution in water. Thus, it is not very relevant to test water unless levels in the air are way too high. This is a recommendation of the EPA agency in the US.
Usually, the concentration levels differ in different places. For example, compared to the national average, the state of Maine normally records higher concentration levels of this gas. With this, all wells made in the state should undergo testing as a mandatory requirement. In America, action levels for the gas in water do not exist as of now.
The amount of radon gas in the air usually varies with the season and time of day. For instance, the concentration may be very high during some seasons than others. The same fluctuations also happen on a daily basis, which makes short term tests no accurate assessments of the average levels of the gas in a home. Short term concentrations are usually affected a lot by change in barometric pressure and transient weather.
Ensuring proper ventilation and the use of fans inside a house can also lower concentration levels. The process of testing is usually accomplished using active and passive devices that are placed into the building. Some devices are capable of calculating the results of the testing on-site. On the other hand, some systems need to be sent to the laboratory in order for the calculation of results to be done.
For testing to be done in water a little amount of water is taken to a laboratory for analysis. In order for one to be accurate with results, it is necessary to re-do the testing of both air and water. Once testing has been completed, mitigation efforts should start immediately.
Improvement of ventilation is one of the basic ways of mitigating the gas. The spaces in which ventilation can be applied include under the membrane, slab, or the floor. Proper eradication can also be done by performing air exchanges inside the space every hour. To assist in this process, invention of various systems has been done. These systems use ventilation of activated charcoal to do the job.
This process is comprised of a number of stages which include testing. Testing is done to determine the quality of domestic water and indoor air. As far as safety is concerned, no levels of radon can b considered as safe. Eliminating the gas completely is almost impossible. Therefore, different action levels have been set by governments around the world for when the level is considered to be high enough.
The concentration level of 2.7 pCi/1 or more should call for rapid action according to the WHO. This level of concentration addresses air levels of the gas. Radon that exists in gaseous form is much more dangerous than one that exists a solution in water. Thus, it is not very relevant to test water unless levels in the air are way too high. This is a recommendation of the EPA agency in the US.
Usually, the concentration levels differ in different places. For example, compared to the national average, the state of Maine normally records higher concentration levels of this gas. With this, all wells made in the state should undergo testing as a mandatory requirement. In America, action levels for the gas in water do not exist as of now.
The amount of radon gas in the air usually varies with the season and time of day. For instance, the concentration may be very high during some seasons than others. The same fluctuations also happen on a daily basis, which makes short term tests no accurate assessments of the average levels of the gas in a home. Short term concentrations are usually affected a lot by change in barometric pressure and transient weather.
Ensuring proper ventilation and the use of fans inside a house can also lower concentration levels. The process of testing is usually accomplished using active and passive devices that are placed into the building. Some devices are capable of calculating the results of the testing on-site. On the other hand, some systems need to be sent to the laboratory in order for the calculation of results to be done.
For testing to be done in water a little amount of water is taken to a laboratory for analysis. In order for one to be accurate with results, it is necessary to re-do the testing of both air and water. Once testing has been completed, mitigation efforts should start immediately.
About the Author:
You can find an overview of the benefits you get when you use professional radon gas testing Upper MI services at http://www.houghtoninspections.com/inspection-services right now.
No comments:
Post a Comment